RAM Brake/Clutch Reservoir Mount With Garmin VIRB Camera Adapter

Description

The RAM Brake/Clutch Reservoir Mount With Garmin VIRB Camera Adapter consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and Garmin VIRB camera adapter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm this allowing for almost infinite adjustment and perfect viewing angles. The adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.

Features

• Consists of a hardware for mounting
• Double socket arm
• Garmin VIRB camera adapter
• 1" diameter patented rubber ball and socket system
• Allowing for almost infinite adjustment
• Perfect viewing angles

Specifications

Hardware Included

• Assembly hardware
• (2) m6 x 55mm hex bolts
• (2) 1/4-20 x 2" hex bolts
• (2) 1/4"-20 x 2.5" hex bolts
• (2) 1/2" spacers
• (2) 1/4" split lock washers
• (1) 1/4"-20 u-bolt for .5" - 1" rails
• (1) 1/4"-20 u-bolt for 1" - 1.25" rails
• (2) 1/4"-20 nylock nuts
• (2) rubber caps
• (1) u-bolt spacer